Sauna lighting planner

Plan your sauna LED lights to fit your benches

Draw the benches, mark the heater and steps, and choose the light positions. The planner sizes the profiles and strips for each mounting position and suggests a driver and controls.

    2.

What are the benches in your sauna like?

Draw the benches

Drag the parts into place and stretch them from the edge handles. Parts snap to the walls and to each other. A step and the heater can stand in front of a platform or be set into it, in which case they cut out their own area of the platform.
{{ editorEl }}
{{ warn }}
{{ lg.label }}
{{ selTitle }}
{{ selInfo }}
Click a part to edit it, or add a new one below.
Add
Sauna dimensions
Surface colours Dark wood reflects less light. The planner recommends a strip based on the surfaces.
{{ mr.label }}: {{ mr.cur }}

Where should light go?

{{ zoneWarn }}
Floor plan from above
{{ planEl }}
Side section
{{ sectionEl }}
3D model Preview with your chosen lights and wood. Switch to evening to see the light.

{{ zs.label }}

{{ zs.desc }}
Choose a strip
Choose a profile
Floor plan: {{ zs.label }}
{{ planEl }}
Profile position under the platform: {{ zs.fTxt }}
Front edgeBack edge / wall
At the front edge the light points down and forward, and the profile is shorter at corners. At the back edge the profile runs the full length of the wall.
Runs and cables Click a light run in the floor plan to remove or restore it.
At corners
{{ is.label }} {{ is.txt }}
S = supply cable to the driver, choose which end. At corners and joints in long runs, the strips are joined with a 5 cm cable.
Dimensions: {{ zs.summary }} You can shorten a profile if the light should not run the full length of the bench. The strip is recalculated.
ProfileWallLengthStripCable
{{ c.no }}{{ c.wall }} cm {{ c.strip }}{{ c.link }}

Control and driver

Driver location
Which lights are controlled together? Each group gets its own driver and control, and can be controlled separately.
{{ gr.label }}
{{ g.title }} {{ g.load }}
Button
 Driver
No suitable driver was found in the product data. Send a quote request and we will choose one.
Choose the light positions first.
{{ r.name }}
{{ r.name }} {{ r.qty }}
{{ r.price }}
Total{{ total }}
Prices include VAT. Shipping is added to the order.
Delivery
Request a quote {{ qMsg }}
{{ footNote }}

Does the button fit your switch range?

The wireless Zigbee buttons are 55 mm size and fit these manufacturers’ frames as they are:

BerkerS1, B1, B3, B7 Glass
GiraStandard 55, E2, Event, Esprit
JungA500, A Plus
MertenM-Smart, M-Arc, M-Plan
SchneiderExxact

If your switches are from the ABB Impressivo range, choose an adapter frame for the button. The frame is an accessory, one per button.